Billion BiPAC 7300NX Manual de usuario Pagina 1

BiPAC 7300NX/N RE (3G) / Wireless-N ADSL2+ Firewall Router User Manual Version Released: 1.05 (FW: v2.02b-dj1)

6 • WLAN on/off time schedule control ATM and PPP Protocols • ATM Adaptation Layer Type 5 (AAL5) • Multiple Protocol over AAL5 (RFC 2684, formerly RF

96 Main Port—EWAN (BiPAC 7300N RE only) Besides using ADSL to get connected to the Internet, BiPAC 7300N RE offers its Ethernet port 1 as a WAN port t

97 Fixed IP Address (EWAN) Select this option to set static IP information. You will need to enter in the Connection type, IP address, netmask, and

98 PPPoE (EWAN) PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP. Line Speed: Set the downst

99 Main Port—3G (BiPAC 7300NX only) Mode: There are 5 options of phone service standards: GSM only, UTMS only, GPRS/EDGE first, UMTS first, and Auto

100 Connection: Always On: Check Enable to allow the router automatically reconnects the connection when ISP disconnects it. Keep Alive: Check Enable

101 5.3.2.3 ADSL Mode ADSL Mode: There are four modes “Open Annex Type and Follow DSLAM’s Setting”, ”Annex A”, ”Annex L”, ”Annex M” and “Annex J”

102 5.3.3 System There are five items within the System section: Time Zone, Firmware Upgrade, Backup/Restore, Restart, User Management and Mail Aler

103 5.3.3.1 Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol (SNTP) to get the curren

104 DO NOT power down the router or interrupt the firmware upgrade while it is still in process. Improper operation may damage the router. Please see

105 5.3.3.3 Backup / Restore These functions allow you to save and backup your router’s current settings to a file on your PC, or to restore a previo

7 Compatible 3G USB modems*3 (BiPAC 7300NX only) 3G Brand 3G Model ONDA MF628,MF638, MDC525UP, MO825UP,MF622,MDC502HS Option ICON225 NOVATEL MC950D

106 5.3.3.4 Restart Router Click Restart with option Current Settings to reboot your router and save the current configuration to device. If you w

107 receive your router, and any time you reset your configuration to Factory Defaults. 5.3.3.6 Mail Alert Send a log via email, if WAN IP is change

108 BiPAC 7300NX SMTP Server: Enter the SMTP server that you would like to use for sending emails. Username: Enter the username of your email accou

109 5.3.4 USB Besides connecting to 3G modem, USB 2.0 port can also provide storage features, and server as FTP Server and Samba Server. USB Server ha

110 Add/Delete User 1. Enter username and password (admin is the default user) 2. Click Add. The new user account will display below. 3. Choose

111 In the above example, we add a user named test. And the user is granted with authority of FTP and Samba server access. User test can access the FT

112 5.3.4.2 Storage Storage page displays the information of storage device which plugged in USB port. In the listing, all the folders in the USB de

113 Add/Delete directory 1. Enter directory name in the directory name field and choose partition path which the directory will located. 2. Click Ad

114 3. Choose the directory which you want to delete then click Rename/Delete to romove this directory. A message from webpage will remind you by ”Ar

115 5.3.4.3 Samba Server Samba Server Setup Samba Service: Enable or Disable Samba Server function. Workgroup: Enter the workgroup name in this

8 1.3 Hardware Specifications Physical Interface • DSL: ADSL port • Ethernet: 4-port 10/100M auto-crossover (MDI/MDI-X) switch • EWAN: Ethernet port

116 5.3.4.4 FTP Server Enable FTP Server feature, your device can serve as a FTP server, you can use FTP access client or windows cmd to upload/downl

117 When using Virtual Servers (port mapping) your PCs are exposed to the ports specified opened in your firewall packet filter settings. 5.3.5 Fire

118 Firewall Security and Policy (General Settings): Inbound direction of Packet Filter rules prevent unauthorized computers or applications accessing

119 5.3.5.1 Packet Filter Packet filtering enables you to configure your router to block specified internal/external users (IP address) from Internet

120 Direction: Determine whether the rule is for outgoing packets or for incoming packets. Time Schedule: It is self-defined time period. You may sp

121 5.3.4.2 MAC Filter A MAC (Media Access Control) address is the unique network hardware identifier for each PC on your network’s interface (i.e. it

122 5.3.4.3 Intrusion Detection Check Enable if you wish to detect intruders accessing your computer without permission. The router automatically dete

123 For SYN Flood, ICMP Echo Storm and ICMP flood, IDS will just warn the user in the Event Log but it will not be able to protect against such attack

124 Src IP: Source IP Src Port: Source Port Dst Port: Destination Port Dst IP: Destination IP 5.3.4.4 Block WAN PING Check Enable

125 “abcde” occurs in the URL. Domains Filtering: Checks the domain name in URLs accessed against your list of domains to block or allow. If it mat

9 1.2 Applications of the devices BiPAC 7300N RE Broadband Router mode ADSL Router mode

126 ~ Block Cookies: Blocks Cookies ~ Block Proxy: Blocks Proxy Except IP Address: Time Schedule: It is self-defined time period. You may specify a

127 5.3.5 QoS (Quality of Service) Quality of Service Introduction If you’ve ever found your ‘net’ speed has slowed to a crawl because another family

128 There are two settings to be provided in the Router: ~ LAN to WAN: You want to control the traffic flow from the local network to the outside worl

129 DSCP Mapping Table ADSL2+ Router Standard DSCP Disabled None Best Effort Best Effort (000000) Premium Express Forwarding (101110) Gold servic

130 have higher priority to acquire the bandwidth. ~ High ~ Normal: The default is normal priority. ~ Low For the sample priority assignment for diff

131 QoS example for your Network Connection Diagram ADSL Subscription Rate Upstream: 256 kbps Downstream: 2048 Mbps Example QoS Plan Applica

132 Example QoS Setup VoIP application Voice is latency-sensitive application. Most VoIP devices are used SIP protocol and the port number will b

133 5.3.6 Virtual Server In TCP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming con

134 designated as “well-known ports”. The registered ports are numbered from 1024 through 49151. The remaining ports, referred to as dynamic ports, or

135 5.3.6.1 Port Mapping Application: Select the service you wish to configure Protocol: Automatic when you choose Application from listbox or se

10 BiPAC 7300NX

136 Since NAT acts as a “natural” Internet firewall, your router protects your network from access by outside users, as all incoming connection attemp

137 5.3.6.2 DMZ DMZ: The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP address as the DMZ Host, all inco

138 5.3.6.3 ALG Controls enable or disable various protocols over application layer. For example, SIP ALG: Enable: When SIP phone need ALG to pass th

139 5.3.7 Wake on LAN This feature provides greater flexibility for users to turn on / boot the computer of the network from a remotely site. MAC Add

140 5.3.8 Time Schedule The Time Schedule supports up to 16 time slots which helps you to manage your Internet connection. In each time profile, you m

141 5.3.9 Advanced Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the rou

142 5.3.9.1 Static Route Destination: The destination subnet IP address. Netmask: Subnet mask of the destination IP addresses based on above desti

143 Edit: Check the Edit radio button to display the parameter of the selected application, then after changing the parameters click the "Edit/De

144 Domain Name, Username and Password: Enter your registered domain name and your username and password for this service. Period: Set the time peri

145 5.3.9.5 Device Management The Device Management advanced configuration settings allow you to control your router’s security options and device mo

11 Chapter 2 Product Overview 2.1 Important Notes 9 Place the router on a stable surface. 9 Only use the power adapter that

146 Disable: Check to disable the router’s UPnP functionality. Enable: Check to enable the router’s UPnP functionality. UPnP Port: The Default sett

147 Step 3: In the Communications window, select the Universal Plug and Play check box in the Components selection box. Step 4: Click OK to go back

148 Step 4: Select Networking Service in the Components selection box and click Details. Step 5: In the Networking Services window, select the Univ

149 Auto-discover Your UPnP-enabled Network Device Step 1: Click start and Control Panel. Double-click Network Connections. An icon displays under Int

150 Step 4: You may edit or delete the port mappings or click Add to manually add port mappings. Step 5: Select Show icon in notification area when c

151 Web Configurator Easy Access With UPnP, you can access web-based configuration for the BiPAC 7300NX/N RE without first finding out the IP address

152 5.3.9.6 IGMP IGMP, known as Internet Group Management Protocol, is used to management hosts from multicast group. IGMP Proxy: Accepting multica

153 view and modify the data. Trap Community: Specify a name to be identified as the Trap Community, and an IP address. This community string will be

154 From RFC1650 (EtherLike-MIB): ; dot3Stats From RFC 1493 (Bridge MIB): ; dot1dBase group ; dot1dTp group ; dot1dStp group (if configured as spann

155 5.3.9.8 TR-069 client TR-069 (short for Technical Report 069) is a DSL Forum (which was later renamed as Broadband Forum) technical specification

12 2.2 Package Contents BiPAC 7300NX/N RE (3G) / Wireless-N ADSL2+ Firewall Router CD-ROM containing the on-line manual and QSG RJ-11 ADSL/te

156 5.3.9.9 Remote Access Remote Access Control: Enable: Select Enable to allow management access from remote side (mostly from internet). Duratio

157 5.4 Save Configuration to Flash After changing the router’s configuration settings, you must save all of the configuration parameters to FLASH to

158 5.6 Logout To exit the router’s web interface, choose Logout. Please ensure that you have saved the configuration settings before you logout. Be a

159 Chapter 6 Troubleshooting If your ADSL Router is not functioning properly, you can refer first to this chapter for simple troubleshooting bef

160 Frequent loss of ADSL linesync (disconnections). Ensure that all other devices connected to the same telephone line as your router (e.g. telephone

161 APPENDIX Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual.

13 2.3 The Front LEDs LED Meaning 1 Power Lit red while the flash is damage and cannot bring the system up. Lit green when the system is ready.

14 2.4 The Rear Ports BiPAC 7300N RE Port Description 1 Antenna Connect the antenna to this port. 2 ON/OFF Power ON/OFF switch. 3 Power Connect the

15 BiPAC 7300NX Port Description 1 Antenna Connect the antenna to this port. 2 ON/OFF Power ON/OFF switch. 3 Power Connect the supplied power adapt

Table of Contents Chapter 1... 1 1

16 Before powering on the router to enter the recovery process, please configure the IP address of the PC as 192.168.0.100 and proceed with the follo

17 2.5 Cabling One of the most common causes of problems is because of bad cabling or ADSL line(s). Make sure that all connected devices are turned on

18 Chapter 3 Installation You can configure the BiPAC 7300NX/N RE router through the convenient and user-friendly interface of a web browser. Mos

19 3.2 Network Configuration 3.2.1 Configuring a PC in Windows 7 1. Go to Start. Click on Control Panel. Then click on Network and Internet. 2. When t

20 4. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. 5. In the TCP/IPv4 properties window, select the Obtain an IP address au

21 3.2.2 Configuring a PC in Windows Vista 1. Go to Start. Click on Network. 2. Then click on Network and Sharing Center at the top bar. 3. When t

22 5. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. 6. In the TCP/IPv4 properties window, select the Obtain an IP address au

23 3.2.3 Configuring a PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connectio

24 3.2.4 Configuring a PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connec

25 3.2.5 Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Conf

5.3.1.3 Wireless... 65 5.3.1.4 Wireless Security...

26 3.2.6 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Prot

27 3.3 Factory Default Settings Before configuring the router, you need to know the following default settings. Web Interface: (Username and Passwor

28 3.4 LAN and WAN Port Addresses The parameters of LAN and WAN ports are preset in the factory. The default values are shown below. LAN Port WAN Por

29 3.6 Configuring with your BiPAC 7300NX/N RE Easy Sign On After setting up the router with appropriate cables plugged, proceed to load the int

30 3. Show Auto scan result - Protocol information. 4. Please enter “Username” and “Password” as supplied by your ISP (Internet Service Provider) an

31 7. Please configure the Wireless LAN setting and click Continue. 8. Save Configuration. 9. Congratulations!! You’ve completed the setup proc

32 Web Configuration Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go”, a user name and pa

33 Chapter 4 Basic Configuration Once you have logged on to your BiPAC 7300NX/N RE Router via your web browser, you can begin to set it up according t

34 4.1 Status ( BiPAC 7300NX for example) Device Information Model Name: Provide a name for the router for identification purposes. System Up-Time:

35 4.2 Quick Start For the exactly steps, turn to Advanced –Quick Start for help. Set Wireless configuration WLAN Service: Default setting is s

APPENDIX... 161

36 4.3 WAN ADSL Main Port: Select the connection mode from the drop-down menu, here ADSL. VPI/VCI: Enter the VPI and VCI information provided by yo

37 EWAN (BiPAC 7300N RE only) Main Port: Select the connection mode from the drop-down menu, here EWAN. Protocol: select the protocol used: Obtain a

38 3G (BiPAC 7300NX only) Mode: There are 5 options of phone service standards: GSM only, UTMS only, GPRS/EDGE first, UMTS first, and Automatic. If

39 4.4 WLAN WLAN Service: Default setting is set to Enable. ESSID: The ESSID is the unique name of a wireless access point (AP) to be distingui

40 Channel ID: Select the ID channel that you would like to use. Security Mode: You can disable or enable with WPA or WEP for protecting wireless

41 this AP, failure occurs. This ESSID(AP) will be invisible to you. In this case, if you want to join this wireless network, enter the exactly ESSID

42 WPA / WPA2 Pre-Shared Key WLAN Service: Default setting is set to Enable. If you want to use wireless, you can select Enable. ESSID: The ESS

43 WEP WLAN Service: Default setting is set to Enable. If you do not have any wireless, select Disable. ESSID: The ESSID is the unique name of a

44 Channel ID: Select the wireless connection channel ID that you would like to use. Note: Wireless performance may degrade if the selected channel I

45 Chapter 5 Advanced Configuration Once you have logged on to your BiPAC 7300NX/N RE Router via your web browser, you can begin to set it up accordi

1 Chapter 1 Introduction 1.1 Introducing the BiPAC 7300NX/N RE The BiPAC 7300NX/N RE is an economical ADSL2+ router ideal for residential users to hav

46 5.1 Status ( BiPAC 7300NX for example) Device Information Host Name: Provide a name for the router for identification purposes. Host Name lets

47 System Up-Time: Records system up-time. Current time: Set the current time. See the Time Zone section for more information. Hardware Version: De

48 5.1.1 ADSL Status DSP Firmware Version: DSP code version DMT Status: Current DMT Status Operational Mode: To show the state when user select “A

49 5.1.2 3G Status (BiPAC 7300NX only) Status: The current status of the 3G card. Click Status to go to 3G configuration page. Signal Strength: The s

50 5.1.3 ARP Table This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the mapping of Internet (IP) addresses to E

51 5.1.5 System Log Display system logs accumulated up to the present time. You can trace historical information with this function.

52 5.1.6 Firewall Log Firewall Log displays log information of any unexpected action with your firewall settings. This page displays the router’s Fire

53 5.1.7 UPnP Portmap The section lists all port-mapping established using UPnP (Universal Plug and Play). Please see the Advanced section of this man

54 5.2 Quick Start ADSL Step1: select ADSL connection Mode. Click Continue to go to next step. Step2: select Auto to let this device to automatical

55 Step 4: type the username and password provided by your ISP. Click Continue to go on. Step 5: wait while the device is configured. Step 6: WAN

2 Multiple Options for Internet Access BiPAC 7300NX offers its USB port for connecting to a 3G / HSDPA USB modem, enabling you to use a 3G / HSDPA, UM

56 Step 7: Click Next to Wireless to do wireless configuration. Enter the ESSID, select the Channel ID and the Security Mode, click Continue to go on

57 EWAN ( BiPAC 7300N RE only) Click on Continue to choose the Protocol to connect with EWAN or click Jump to Wireless Setting to use Protocol: Obtai

58 If connection is successful the following image will be shown. Fixed IP Address Select this option to set static IP information. You will need to

59 If connection is successful the following image will be shown. PPPoE PPPoE (PPP over Ethernet) provides access control in a manner similar to dia

60 Click on the Continue button and wait for your connection to be connected. If connection is successful the following image will be shown.

61 3G (BiPAC 7300NX only) Connect Mode: 3G. TEL No.: The dial string to make a GPRS / 3G user internetworking call. Username: The username provided b

62 Username/Password: Enter the username and password provided by your ISP. Authentication Protocol: Default is Auto. Please consult your ISP on wheth

63 5.3 Configuration Click this item to access the following sub-items that configure the ADSL router: LAN, WAN, System, USB (BiPAC 7300NX only), Fire

64 The router supports more than one Ethernet IP addresses in the LAN, and with distinct LAN subnets through which you can access the Internet at the

65 Click Edit radio button, then the item you want to reedit will be displayed above just as showed below. Press Edit/Delete to apply your modificat

3 1.2 Features • Dual-WAN approach – ADSL2+ and 3G connections (BiPAC 7300NX only) • Dual-WAN approach –ADSL2+ and Ethernet WAN for Broadband Connecti

66 prioritization policy. Here we provide two groups of Time Schedule setting. You can flexibly set the time you want the wireless connection works. I

67 Channel ID: Select the ID channel that you would like to use. Channel Wdith: Select either 20 MHz or 20/40 MHz or 40MHZ for the channel bandwidth

68 2. Peer WDS MAC Address: It is the second associated AP’s MAC Address. 3. Peer WDS MAC Address: It is the third associated AP’s MAC Address. 4

69 automatically between wireless client and Access Point (AP). Default value is 3600 seconds. If you want to enable the RADIUS service, check Enable

70 The Default algorithm is AES. WPA Shared Key: The key for network authentication. The input format is in character style and key size should be in

71 If you want to enable the RADIUS service, check Enable and then do the following settings. WEP Authentication: If you enable RADIUS/802.1x, t

72 5.3.1.5 WPS WPS (WiFi Protected Setup) feature is a standard protocol created by Wi-Fi Alliance. This feature greatly simplifies the steps needed

73 3. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Config Mode as Enrollee, press the WPS button on the top bar, select the

74 4. The client’s SSID and security setting will now be configured to match the SSID and security setting of the registrar.

75 PIN Method: Configure AP as Enrollee 1. In the WPS configuration page, change the Role to Enrollee. Then press Start. 2. Jot down the WPS PIN (

4 ADSL Compliance*1 • Compliant with ADSL Standards - Full-rate ANSI T1.413 Issue 2 - G.dmt (ITU G.992.1) - G.lite (ITU G.992.2) - G.hs (ITU G.994.1)

76 4. The router’s (AP’s) SSID and security setting will now be configured to match the SSID and security setting of the registrar.

77 5. Now to make sure that the setup is correctly done, cross check to see if the SSID and the security setting of the registrar setting match with

78 The parameters on both Wireless Configuration and Wireless Security Configuration page are as follows:

79 PBC Method: 1. Press the PBC button of the AP. 2. Launch the wireless client’s WPS Utility (eg. Ralink Utility). Set the Config Mode as Enrolle

80 3. When the PBC button is pushed, a wireless communication will be established between your router and the PC. The client’s SSID and security sett

81 Wi-Fi Network Setup with Windows Vista WCN: 1. Jot down the AP PIN from the Web (eg. 25879810). 2. Access the Wireless configuration of the web

82 3. In your Vista operating system, access the Control Panel page, then select Network and Internet > View Network Computers and Devices. Doubl

83 4. Enter the AP SSID then click Next. 5. Enter the Passphrase then click Next.

84 6. When you have come to this step, you will have completed the Wi-Fi network setup using the built-in WCN feature in Windows Vista.

85 5.3.1.6 DHCP Server You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable the router’s DHCP relay functions. T

5 Firewall & Virtual Private Network(VPN) • Built-in NAT Firewall • Stateful Packet Inspection (SPI) • Prevents DoS attacks including Land Attack

86 DHCP Server Mode: DHCP Server To configure the router’s DHCP Server, check DHCP Server. You can then configure parameters of the DHCP Server inclu

87 DHCP Server Mode: DHCP Relay If you check DHCP Relay and then you must enter the IP address of the DHCP server which assigns an IP address back to

88 5.3.2.1 WAN Interface (BiPAC 7300NX only) ADSL WAN Connection Main Port: Select main port from the drop-down menu. Two connection ports are supp

89 Detect Rule (either one): 1. ADSL Down 2. Ping Fail • No Ping: It will not send any ping packet to determine the connection. It means to disable th

90 5.3.2.2 WAN Profile Main Port--ADSL PPPoE Connection (ADSL) PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up ser

91 IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from your ISP. Auth. Protocol: Default is Auto. Your

92 one provided by your ISP Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric characters (case sensitive). This

93 MPoA Connection (ADSL) Description: Your description of this connection. VPI and VCI: Enter the VPI and VCI information provided by your ISP.

94 Pure Bridge Connections (ADSL) Description: A user-definable name for this connection. VPI/VCI: Enter the VPI and VCI information provided by

95 alphanumeric characters (case sensitive) Service Name: This item is for identification purposes. If it is required, your ISP provides you the info